Oven cleaner did not work…stain seems embedded in the metal!
WD40 did not work!
This is UNREAL!!!!!! I JUST this moment was polishing my silverware!!!!!!
I would try that, my friend.
The kind that looks like a long wand/rod with a handle that comes with cutlery sets. It has ridges that run vertically along the rod and I'm not sure which direction I should sharpen my blade against. I've use it to run down the blade perpendicularly but with no results.
Hold the tool with one hand in front of you like a sword and hold the knife with the other hand. Starting from the base of both (cutting edge of knife looking to you), just run the knife along the tool away from you (it is safer) while you pull off the knife to the right, the whole cutting length of the blade must run througout the length of the tool.
Repeat each side of the blade alternatively (up and down the tool) only 2 or 3 times, it is best to do it only a little but more often, you will keep your knife longer.
Dont give too much pace because knife are rather fragile against these sharpeners.
Try Easy Off or any oven cleaner.